Βάνα Ατμοπαγίδα Ατμοφράκτης Εναλλάκτης Συστήματα ελέγχου ροής Λεβητοστάσιο Ασφαλιστικό Πεταλούδα Σφαιρικός Αντεπίστροφο Αναλογική Μαχαιρωτή Σύρτου Εξοπλισμός Φίλτρο Διαστολικό
B-Safety - PremiumLine - wall mounted - BR 026 995
wall mounted
PremiumLine safety shower valve with automatic draining
Article-No.: BR 026 995
B-SAFETY body safety showers are available in a modular system. The emergency shower arms and emergency shower valves can be purchased individually and adapted to the conditions on site. In this way, almost all conceivable installation requirements can be realized.
Technical Specifications
- Material: stainless steel, plastic
- Surface: polished
- Dimensions (H x W x D): 150 x 105 x 100 mm
- Operating pressure: 1 to 5 bar
- Flow rate: at least 60 l/min at 1 bar flow pressure
- Water inlet: ¾“ female
Norms / Approvals
- EN 15154-2:2006
- EN 15154-5:2019
- ANSI Z358.1-2014
- GOST-R, Certificate-No. 0615463 0615463
Product description
The emergency shower valve consists of a robust ball valve with drinking water approval, which can be mounted either to the right or left of the door. The volume flow is at least 60 liters / minute at 1 bar flow pressure. It is operated by a stainless steel lever with a sturdy plastic handle. Installation at handle height is recommended for this safety shower valve. An optional drain can be used to ensure automatic drainage between the shower head and the valve.
Mounting-Instructions:
For an installation in accordance with EN 15154-1:2006 it must be ensured, that the safety shower installation is self-draining between valve and shower head.
Technical Description
- ball valve with lever actuation on wall flange of stainless steel, DIN-DVGW tested and certificated, water inlet ¾” female
- flow rate at least 60 l/min at 1 bar flow pressure
- lever made of stainless steel, polished, length 160 mm
- robust handle of plastics, black, diameter 25 mm, length 90 mm
- opening angle 90°, not self-closing
- information sign “OPEN” for confusion-free use in an emergency, orange, photoluminescent according to DIN 67510
- mounting height for lever according to the standards listed below: 0 to 1750 mm height above floor
- according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
- according to ANSI Z358.1-2014, EN 15154-1:2006 and EN 15154-5:2019
