B-Safety - PremiumLine - safety eye shower in stainless steel cabinet - BR 270 095
wall mounted, recessed version
PremiumLine safety eye shower in stainless steel cabinet
Article no.: BR 270 095
Safety eye showers in stainless steel housings are installed in the laboratory cells or in the wall to ensure barrier-free access in the laboratory. The eye showers are characterised by a purist, clear design with noble stainless steel surfaces. By pulling down the large handle, the integrated lid is swivelled downwards and the eye wash station is activated. The stainless steel lid also acts as a catch basin to collect and drain off most of the used water.
Technical Specifications
- Material: Stainless steel
- Surface: polished
- Dimensions (H x W): 425 x 305 mm
- Operating pressure: 2.5 to 5 bar
- Flow rate: 14 litres / minute
- Water inlet: 3/4“ female
- Water outlet: ¾” male
Norms / Approvals
- EN 15154-2:2006
- ANSI Z358.1-2014
- DIN-DVGW, NW-0417CL0263
- GOST-R, Certificate-No. 0615463 0615463
Product description
The eye shower is equipped with two B-SAFETY high-performance spray heads, which not only meet the requirements of EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure that the water is distributed over a large area. This also takes care of the regions around the eyes and eyes can be positioned in the water jet without problems. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye.
The correct spray height and a standard-compliant spray pattern are achieved by the integrated flow regulator, regardless of the water pressure applied. The rubber sleeves around the shower head protect the person seeking help from impact injuries. The large holes in the shower heads prevent standing water and thus calcification. The orange, photoluminescent “OPEN” sign indicates that the unit can be used without confusion in an emergency.
Technical Description
- housing of stainless steel, polished, recessed wall mounting, dimensions (H x W x D): 425 x 305 x 100 mm, mounting hole dimension (H x W): 380 x 260 mm
- integrated swivel door of stainless steel, polished, with simultaneous triggering of the eye shower when the door is swung down
- Sign “OPEN” for confusion-free use in emergencies, orange, photoluminescent according to DIN 67510
- ball valve 3/4” of stainless steel, with swivel door actuation, DIN-DVGW tested and certificated
- high-performance spray heads made of stainless for large-scale dispersion of water, polished, with plastic spray plate, low calcification, incl rubber sleeves and sealed dust caps, mounted over distributor fork
- integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 2.5 to 5 bar flow pressure
- inclusive sign for eye shower according to EN ISO 7010 und ASR A1.3 on the swivel door, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
- height 425 mm, width 305 mm, depth 100 mm
- mounting hole dimension 380 x 260 mm
- mounting height 865 mm (± 200 mm)
- according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
- according to ANSI Z358.1-2014 and EN 15154-2:2006
- DIN-DVGW tested and certificated
