Macoga - Αντικραδασμικά - MAC-FB Elbow
MAC-F, MAC-FT, MAC-FP, MAC-FC, MAC-FB, MAC-FR & MAC-O Series
High quality custom-made expansion joints supplied with split or fixed steel backing flanges. The full face flanges are integral with the body of the joint and drilled to conform the bolt pattern of the companion flanges of the pipe line.
Rubber bellows: Reinforced EPDM, EPDM HT, Nitrile, Spec. Nitrile, Nitrile white, Hypalon, SBR, Viton®, Chloroprene, etc.
Flanges: shot-blasted and painted carbon steel as standard. Also available in hot dip galvanized carbon steel, stainless steel, etc. Drilled to EN, ANSI, AWWA, JIS standards or any specific dimension.
For vacuum applications, an internal vacuum ring is incorporated.
MAC-F and MAC-FT can be supplied with one or more arches. Dimensions from DN 15 to DN 6000.
These expansion joints accommodate axial and lateral movements and counteract the bellows pressure thrust. They can be fabricated with single and multiple arches.
An additional bellows is incorporated into the unit and is subject to the line pressure to generate a force equal and opposite to that on the main bellows. Tying these bellows together neutralizes the pressure load on the unit.
The Pressure Balanced Expansion Joints are used in situations similar to those described for the Axial and/or Lateral Expansions, although this particular type of Expansion Joint offers the additional advantage of not transferring the thrust caused by the internal pressure to the pipes or adjacent equipment.
This characteristic is especially important when it comes to joining the pipes to turbines or other delicate equipment which, by their nature, are unable to withstand these extra loads. The only loads on the equipment are the sum of the forces required to move the line bellows and balancing bellows of the expansion joint.
This type of Joint can be fitted between intermediate fixed points so main anchoring of the pipe or adjacent equipment is not required.
