Cla-Val - Hydraulic Altitude & Level Control Valves - 210-01 & 610-01 Altitude Valve for One-Way Flow ***
Cla-Val manufactures several different types of level control valves. Non-modulating float valves open fully when the liquid level in a tank reaches a pre-set low point. The opening operation allows for the tank to be refilled to a pre-set high point, at which time the valve closes drip-tight.
Modulating float valves maintain a constant liquid level in a storage tank by compensating for variations in supply or demand and are used to control the flow into or out of a tank by either opening or closing on a rising level.
Cla-Val Altitude Control Valves regulates the high water level in reservoirs without the need for floats or other devices. These non-throttling valves remain fully open until the pre-set shut-off point is reached. Altitude valves can be configured for one-way or two-way flow depending on system requirements and can be furnished with auxiliary controls for multiple functions such as pressure sustaining, pressure reduction, rate-of-flow control, solenoid override or other parameters as needed.
Cla-Val 210-01 and 610-01 Altitude Valves control the high water level in reservoirs without the need for floats or other devices. They are non-throttling valves that remain fully open until the shut-off point is reached. These valves are designed for one-way flow only.
These valves can also be furnished with auxiliary controls to meet the need for multiple functions, such as pressure sustaining, pressure reduction, rate of flow control, solenoid override, etc.
Used on reservoirs where the water is withdrawn through a separate line or through a bypass equipped with a check valve. The valve opens to refill the reservoir when the water lowers below the shut-off level. For more information see data sheet E-CDS6A.
