Globe Valves - Y-Pattern Bolted Bonnet | Fluitek
Globe Valves - Y-Pattern Bolted Bonnet | Fluitek
Globe Valves - Y-Pattern Bolted Bonnet | Fluitek
Globe Valves - Y-Pattern Bolted Bonnet | Fluitek
Globe Valves - Y-Pattern Bolted Bonnet | Fluitek
Globe Valves - Y-Pattern Bolted Bonnet | Fluitek

Globe Valves - Y-Pattern Bolted Bonnet | Fluitek

The Globe Valves - Y-Pattern Bolted Bonnet by Fluitek Orsenigo Valves offer an innovative design with an inclined stem configuration, known as the Y-pattern, which provides lower pressure drops compared to the traditional T-pattern. These valves feature a cast body construction and are available with either flanged or butt weld ends. They are constructed from a variety of materials, including carbon steel, low alloy steel, austenitic stainless steel, and nickel alloys, adhering to ASTM/ASME or EN standards. The valves are available in pressure classes ranging from 150# to 600# and typically do not exceed a size of 12 inches, although Fluitek Orsenigo Valves can accommodate specific market requirements. The disc design is usually either plug type or parabolic shaped, optimizing flow control.
Standard (Options)
  • ANSI
Connection (Options)
  • Flanged
  • Butt Weld
Material (Options)
  • Carbon Steel
  • Austenitic Stainless Steel
  • Low Alloy Steel
  • Nickel Alloys
Pressure Rating (Options)
  • 150 lbs
  • 300 lbs
  • 600 lbs

Datasheet and documents

Description

In addition to the line of globe valves bolted bonnet, FLUITEK ORSENIGO VALVES has added a line of same type of valve but with an inclined stem configuration, called Y-pattern type, as an alternative to the straight pattern, also called T-pattern. In principle, the Y-pattern configuration presents lower pressure drops at equal flow rate. The disc is normally either plug type or parabolic shaped. Cast body construction is normally used. Ends configuration is either with flanged ends or with butt weld ends.

Materials range from carbon steel to low alloy steel, to austenitic stainless steel, to nickel alloys. Materials are either to ASTM/ASME standards or to EN standards, either harmonized or calculated to design conditions. Pressure classes (per ANSI standard) are normally ranging from 150# to 300# to 600#. Size range depends on pressure class requirements, normally not exceeding 12”. FLUITEK ORSENIGO VALVES has anyhow no limits in relation to market requirements.

Certifications