Inline Detonation KITO Armaturen - Uni-directional in-line liquid detonation flame arrester - G 13 N
Inline Detonation KITO Armaturen - Uni-directional in-line liquid detonation flame arrester - G 13 N

KITO Armaturen - Uni-directional in-line liquid detonation flame arrester - G 13 N

KITO® detonation flame arresters

If potentially explosive gas-air mixtures ignite in a section of pipeline, a deflagration can turn into a detonation under certain instances.

Standard (Options)
  • DIN
Connection (Options)
  • Flanged
Material (Options)
  • 1.4571
  • Steel
Pressure Rating (Options)
  • PN 10
  • PN 16
  • PN 40
 

KITO® FL/E-…-IIB3

  • As inline armature, detonation-proof and flameproof, used for installation in filling and suction pipes outside from tanks in which in-flammable liquids are stored.
  • Tested and approved as detonation flame arrester type 4.
  • Approved for all materials of the explosion group IIA1 to IIB3 with MESG ≥ 0.65 mm and an maximum operating temperature of 60 °C.
  • Equipped with a safety device against complete emptying which is constructed as flame arrester element in order to prevent the suction of sealing liquid.
  • It is only allowed to install pipe of nominal widths ≤ than the nominal widths of the flange.
  • Mounting position is perpendicular.
  • The body of the housing has to be permanently filled with the storage liquid up to the height of the connecting flanges.
  • Suction rate V max specified in above table may not be exceeded.
KITO Armaturen - Uni-directional in-line liquid detonation flame arrester - G 13 N