Inline Detonation KITO Armaturen - Bi-directional in-line detonation flame arrester, short-time burning proof - G 23.4 N
Inline Detonation KITO Armaturen - Bi-directional in-line detonation flame arrester, short-time burning proof - G 23.4 N

KITO Armaturen - Bi-directional in-line detonation flame arrester, short-time burning proof - G 23.4 N

KITO® detonation flame arresters

If potentially explosive gas-air mixtures ignite in a section of pipeline, a deflagration can turn into a detonation under certain instances.

Standard (Options)
  • DIN
Connection (Options)
  • Flanged
Material (Options)
  • 1.0619
  • 1.4408
Pressure Rating (Options)
  • PN 10
  • PN 16
 

KITO® EFA-Det4-IIA-…/…-3.0-X12

KITO® EFA-Det4-IIA-…/…-3.0-X12-T (-TT)

  • For installation into pipes to the protection of vessels and components against stable detonation of flammable liquids and gases.
  • Tested and approved as detonation flame arrester type 4.
  • Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm.
  • Bi-directionally working in pipes, whereby an operating pressure of 3.0 bar abs. and an operating temperature of 120 °C must not be exceeded.
  • The installation of the detonation flame arrester into horizontal and vertical pipes is permissible.
  • Provided with one or two temperature sensors (PT 100) the armature is certified against short time burning from one or both sides.
  • If only one thermal sensor is attached, it must be installed into that part of the body from which a fire is expected.
KITO Armaturen - Bi-directional in-line detonation flame arrester, short-time burning proof - G 23.4 N