Expansion Joins

Showing 1-12 of 36 item(s)

Comeval - Metal expansion joints, flanged or butt weld ends BW TORAFLEX - S50 / S25

Expansion Joins

Comeval - Metal expansion joints, flanged or butt weld ends BW TORAFLEX - S50 / S25

Comeval - Metal expansion joints, flanged or butt weld ends BW TORAFLEX - S50 / S25

View

Flanged Butt Weld PN 10 PN 16 DIN Stainless Steel

Macoga - Expansion Joints - Type Two Ply

Expansion Joins

Macoga - Expansion Joints - Type Two Ply

Macoga - Expansion Joints - Type Two Ply

The bellows, as the most critical part of the Expansion Joint, can be single ply, multiply, redundant ply or reinforced. In two ply testable bellows each ply is designed for the full operating conditions (pressure, temperature and movements). If a hole or stress crack develops in the inner ply during service, the outer ply takes over without exposing...

View

Macoga - Expansion Joints - Type PTFE

Expansion Joins

Macoga - Expansion Joints - Type PTFE

Macoga - Expansion Joints - Type PTFE

Fluoroplastics possesses unusual and unique characteristics of thermal stability, non-sticking surface, extremely low co-efficient of friction and resistance to practically all corrosive fluids and forms of chemical attack. PTFE or Teflon lined Expansion Joints are widely used in paper mills, chemical plants and other piping applications where acids and...

View

Macoga - Expansion Joints - Type MWY

Expansion Joins

Macoga - Expansion Joints - Type MWY

Macoga - Expansion Joints - Type MWY

This model is designed to absorb lateral and angular movements in only one plane. It is made up of two bellows joined together by a linking pipe and fitted with welding ends or flanges plus a double articulated system. The hinge mechanisms are designed to contain pressure thrust.

View

Macoga - Expansion Joints - Type MWT

Expansion Joins

Macoga - Expansion Joints - Type MWT

Macoga - Expansion Joints - Type MWT

These expansion joints are made of one single bellows element with end connections plus a tie rod system. Regardless of accessories, such as liners and covers, this model absorbs all types of movements in any length of piping but it is mainly used to absorb axial movements and small amounts of lateral movement.

View

Macoga - Expansion Joints - Type MWP

Expansion Joins

Macoga - Expansion Joints - Type MWP

Macoga - Expansion Joints - Type MWP

These expansion joints are made of one single bellows element fitted with welding ends or flanges plus a system of articulated supports which allow for angular movement in one plane only. The hinge mechanism is designed to accept full pressure thrust. These units do not allow axial movement however, some types of hinge systems can be provided with holes...

View

Macoga - Expansion Joints - Type MWL

Expansion Joins

Macoga - Expansion Joints - Type MWL

Macoga - Expansion Joints - Type MWL

This model is made up of two bellows joined together by a central pipe and a system of tie rods able to withstand the thrust produced by the internal pressure. This model is used to absorb lateral movements in all planes. In addition and with a special design and/or positioning of the tie rods system this type may be used to absorb some axial and angular...

View

Macoga - Expansion Joints - Type MWK

Expansion Joins

Macoga - Expansion Joints - Type MWK

Macoga - Expansion Joints - Type MWK

Designed to absorb lateral movements in any direction and angular movements in one plane only. This model is made up of two bellows joined together by a linking pipe and a universal system of double articulated supports.

View

Macoga - Expansion Joints - Type MWCD

Expansion Joins

Macoga - Expansion Joints - Type MWCD

Macoga - Expansion Joints - Type MWCD

Designed to absorb lateral and angular movements in any direction. This model is made up of two bellows joined together by a linking pipe and a double cardan system. A double gimbal expansion joint is basically a two single gimbal expansion joints and an intermediate pipe that joins them. This type of Expansion Joint can absorb a large lateral movement in...

View

Macoga - Expansion Joints - Type MWC

Expansion Joins

Macoga - Expansion Joints - Type MWC

Macoga - Expansion Joints - Type MWC

Gimbal Expansion Joints are designed to allow angular movement in any plane by the use of two pairs of hinges affixed to a common floating gimbal ring. The gimbal ring, hinged and pins are designed to restrain the pressure thrust due to internal pressure and shear forces. A gimbal ring is either round or square. For round gimbals the torsional moment...

View

Macoga - Expansion Joints - Type MWA

Expansion Joins

Macoga - Expansion Joints - Type MWA

Macoga - Expansion Joints - Type MWA

These expansion joints are made of one single bellows element with end connections. Regardless of accessories, such as liners and covers, this model absorbs all of the movements in any one length of piping but it is mainly used to absorb axial movements. It does not restrain pressure thrust so adequate anchors and guides must be provided and they can be...

View

Macoga - Expansion Joints - Type MUX

Expansion Joins

Macoga - Expansion Joints - Type MUX

Macoga - Expansion Joints - Type MUX

These expansion joints are characterized by a high convolution profile and thick ply construction. They can be manufactured in circular, oval or any particular shape. Thick Wall expansion joints are frequently used in heat exchangers, furnace and blast furnace pipe work.

View

1
2
3