Accessories

Showing 97-108 of 138 item(s)

Expansion Joins

Expansion Joints - Type MJA | Macoga

Jacketed Expansion Joints are used in a set of particular circumstances such as when regular insulation is not sufficient and when the main fluid has to be kept at a fixed temperature or simply for security reasons. This model involves using two bellows, one on the inside and one on the outside.

View

Expansion Joins

Expansion Joints - Type MFY | Macoga

This model is designed to absorb lateral and angular movements in only one plane. It is made up of two bellows joined together by a linking pipe and fitted with welding ends or flanges plus a double articulated system. The hinge mechanisms are designed to contain pressure thrust.

View

Expansion Joins

Expansion Joints - Type MFT | Macoga

These expansion joints are made of one single bellows element with end connections plus a tie rod system. Regardless of accessories, such as liners and covers, this model absorbs all types of movements in any length of piping but it is mainly used to absorb axial movements and small amounts of lateral movement.

View

Expansion Joins

Expansion Joints - Type MFP | Macoga

These expansion joints are made of one single bellows element fitted with welding ends or flanges plus a system of articulated supports which allow for angular movement in one plane only. The hinge mechanism is designed to accept full pressure thrust. These units do not allow axial movement however, some types of hinge systems can be provided with holes...

View

Expansion Joins

Expansion Joints - Type MFL | Macoga

This model is made up of two bellows joined together by a central pipe and a system of tie rods able to withstand the thrust produced by the internal pressure. This model is used to absorb lateral movements in all planes. In addition and with a special design and/or positioning of the tie rods system this type may be used to absorb some axial and angular...

View

Expansion Joins

Expansion Joints - Type MFK | Macoga

Designed to absorb lateral movements in any direction and angular movements in one plane only. This model is made up of two bellows joined together by a linking pipe and a universal system of double articulated supports.

View

Expansion Joins

Expansion Joints - Type MFG | Macoga

These expansion joints are made of one single bellows element with end connections. Regardless of accessories, such as liners and covers, this model absorbs all of the movements in any one length of piping but it is mainly used to absorb axial movements. It does not restrain pressure thrust so adequate anchors and guides must be provided and they can be...

View

Expansion Joins

Expansion Joints - Type MFF | Macoga

A special case of the Thick Wall type, Flanged and Flued expansion joints are made in two halves from flat annular plates. The outside edges of the plates are formed in one direction (flanged), and the inside edges are formed in the other direction (flued). The two halves are welded together and then welded into the heat exchanger shell. Because of the...

View

Expansion Joins

Expansion Joints - Type MFD | Macoga

Also known as the universal un-tied expansion joint this model is made up of two bellows joined together by a central pipe. Although it can be used to absorb any combination of the three basic movements it is mainly used to absorb large lateral movements. The amount of lateral deflection that can be accepted is a function of the degree of angulation each...

View

Expansion Joins

Expansion Joints - Type MFC | Macoga

Gimbal Expansion Joints are designed to allow angular movement in any plane by the use of two pairs of hinges affixed to a common floating gimbal ring. The gimbal ring, hinged and pins are designed to restrain the pressure thrust due to internal pressure and shear forces. A gimbal ring is either round or square. For round gimbals the torsional moment...

View

Expansion Joins

Expansion Joints - Type MFA | Macoga

View

Expansion Joins

Expansion Joints - Type MEP | Macoga

MEP Series Externally Pressurized Expansion Joints are designed such that fluid pressure acts on the outside of the bellows. This model is mainly used in cases of high pressure and large amounts of axial compression and extension. When under external pressure, the bellows will retain its shape and can be manufactured in almost any length. When using...

View

Accessories

Informations

Contact us

Athens - Greece
24, Kallidromou str, Peristeri,12133, Greece
+302105789640 +302105789641

Thessaloniki - Greece
1Km. Neochorouda-Thessaloniki str, Kalithea, 54500, Greece
+302310785848 +302310785842

Name	Provider	What it does	Expiry	Allow
Name	Provider	What it does	Expiry	Allow
Language Selector	PrestaShop	Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language. Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language.	30 days	Allow

Accessories

Preferences