Φλογοπαγίδα γραμμής μονόδρομης ροής αντί μετάδοσης φλόγας ανθεκτική σε βραχυχρόνια καύση - H 26.2 N | KITO Armaturen
Φλογοπαγίδα γραμμής μονόδρομης ροής αντί μετάδοσης φλόγας ανθεκτική σε βραχυχρόνια καύση - H 26.2 N | KITO Armaturen

Φλογοπαγίδα γραμμής μονόδρομης ροής αντί μετάδοσης φλόγας ανθεκτική σε βραχυχρόνια καύση - H 26.2 N | KITO Armaturen

Η Φλογοπαγίδα γραμμής μονόδρομης ροής H 26.2 N από την KITO Armaturen είναι μια συσκευή σχεδιασμένη για την αποτροπή μετάδοσης φλόγας σε συστήματα σωληνώσεων. Είναι ανθεκτική σε βραχυχρόνια καύση και εξασφαλίζει την ασφαλή ροή αερίων ή ατμών προς μία κατεύθυνση, προστατεύοντας από πιθανούς κινδύνους ανάφλεξης. Η κατασκευή της είναι υψηλής ποιότητας, προσφέροντας αξιοπιστία και ασφάλεια σε βιομηχανικές εφαρμογές.

Τεχνικά Φυλλάδια / Οδηγίες Χρήσης / Λοιπά

Περιγραφή

KITO® RV/N-IIA-1000/…-1.2-X08

KITO® RV/N-IIA-1000/…-1.2-X08-T

  • Intermediate armature, mainly installed as in-line deflagration flame arrester in pipes to thermal incineration plants for vapor/air and air/gas mixtures.
  • Unilaterally working in pipes, whereby an operating pressure of 1.2 bar abs. and an operating temperature of 80 °C must not be exceeded.
  • Approved for all substances of the explosion group IIA with a MESG > 0.9 mm.
  • The maximum length of the pipes from the KITO® flame arrester to the ignition source is limited (L/D tube length/tube diameter).
  • It is only allowed to install the device in pipes with nominal widths ≤ than the nominal width of the armature (DN).
  • The temperature sensors (2 pieces, arranged on one side) serves to trigger an emergency function, e.g. shutting off or inerting the gas flow if a stabilized burning occurs at the KITO® flame arrester.
  • Proof against “stabilized burning” and withstand this up to a max. burn time BT = 1.0 min.